Humidistat for wall mounting and the possibility of Normally Open or Normally Closed contact.

The humidistat is adjusted by turning the knob on the front panel. To save power there will be up to 2.5 seconds delay before hygrostat responds to the changed position of the knob. At start-up the delay is up to 10 seconds.

When the sensor has detected, the realy should shift position, the light diode will flash at a fast pace, until the shift has taken place.

The light diode flashes at a slow pace when contacts are closed and not at all when the contacts are open.

In case of power failure the relay will remain in the last position before interruption. When restating it may take up to 10 seconds before need of change i detected and performed.

The humidistat has a built in hysteresis (see graph in the manual under 'Downloads' and should not be placed in continuos relative humidity above 80%.

Tariff Number 90328900
EAN-Number 5703471350548
Size (HxWxD) 85x85x35mm
Enclosure IP 20
Supply Voltage 12VDC
Ambient temperature 0 - 40°C
Precision sensor 5%
Measure range 20 - 90%RH


the product at


"If you have any questions or need assistance selecting amongst or using our products, please contact Customer Service:"

+45 55 50 55 50